FLUO 300SM
A unique emulsion grade PTFE grade consisting of aggregated sub-micron PTFE spheres ideal for thin film coatings and gloss retention
FEATURES AND BENEFITS
- PTFE clusters can be media milled into individual nanospheres less than 200 nm
- Superior gloss retention
- Provides lubricity, rub and abrasion resistance and heat resistance
- High surface area of dispersed particles allow lower dosages
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
COMPOSITION
Polytetrafluoroethylene (PTFE)
RECOMMENDED ADDITION LEVELS
0.5 - 1.0%
SYSTEMS AND APPLICATIONS
Solvent based and energy curable coatings and inks. Industrial coatings (including plastic and metal); printing inks and OPV's (including flexo and gravure); powder coatings; interior and exterior can and container coatings; coil coatings; floor coatings.
TYPICAL PROPERTIES
| Request Sample Download TDS Download SDS | |
| Appearance | White Powder |
| Density at 25 °C (g/cc) | 2.2 |
| Maximum Particle Size (µm) | 22 |
| Mean Particle Size (µm) | 2.0 - 4.0 |
| Melting Point °C | >316 |
| Natural or Naturally Derived | No |
| NPIRI Grind | 2.0 - 3.5 |
| Primary Particle Size (µm) | < 0.2 |
|
This product is also available as a water based wax dispersion - Microspersion 300SM-50
| |
FEATURED PERFORMANCE PROPERTIES
| Compare | |
LUBRICANTS AND METAL WORKING | |
SKI AND SURF | |
| Key: Effective Very Effective Extremely Effective |