PROPYLTEX® 200SF

Coarse particle size grades of micronized polypropylene for adding texture, structure and anti-slip properties to a wide variety of paints and coatings


FEATURES AND BENEFITS

  • Provides a consistent medium textured coating surface
  • Tough, high molecular weight polypropylene gives good film durability
  • Does not lower COF; ideal for anti-skid surfaces
  • Easy to disperse powder that can be incorporated with high speed mixing
  • Adds texture in low bake (Low E) powder coatings

COMPOSITION

Polypropylene

RECOMMENDED ADDITION LEVELS

2.0 - 5.0% depending on the level of gloss reduction desired

SYSTEMS AND APPLICATIONS

Water based, solvent based, industrial coatings including metal, plastics and masonry, architectural wall and trim paints; stains, sealers and varnishes; wood coatings; floor coatings.

TYPICAL PROPERTIES

Request Sample Download TDS Download SDS
AppearanceWhite Powder
Density at 25 °C (g/cc)0.89
Maximum Particle Size (µm)74 (200 mesh)
Mean Particle Size (µm)25.0 - 35.0
Melting Point °C160 - 170
Natural or Naturally DerivedNo

FEATURED PERFORMANCE PROPERTIES

Compare
High Melt Flow Rate
Melt Flow Modifier
Fine Pore Forming
Low Residue
Block Resistance
Burnish Resistance
Increased COF
Matting and Gloss Control
Soft Touch
Texture
Anti-slip
Block Resistance
Cleanability
Matting and Gloss Control
No Silica Dust
Resistance to Hot Tire Pick up
Scratch and Abrasion Resistance
Scuff and Heel Mark Resistance
Texture
Key: Effective     Very Effective     Extremely Effective