Printing Inks and OPVs
Printed coatings and inks perform most effectively when properly formulated with micronized wax additives that improve slip, rub, scratch, and block resistance. From flexo to gravure to offset, we offer the most comprehensive line of additives for both high and low gloss printed surfaces.
Download Selector GuidePRODUCT(S) FOUND
AquaBead® 525E
An anionic paraffin/carnauba wax emulsion ideal for water repellency and weather/moisture resistance
- Provides excellent initial water beading and long term water repellency
- Imparts weather and moisture resistance
- Gives surface slip and antiblocking properties
- Wax emulsion particle does not reduce gloss or clarity
- Anionic emulsion stabilization contributes to immediate hydrophobicity
AquaPoly 215
Micronized oxidized polyethylene for rub resistance and slip in aqueous systems
- Provides good rub and mar resistance
- Improves slip properties
- Imparts antiblocking
- Economical
AquaPoly 250
A unique micronized polyethylene wax blend for maximum rub and scratch resistance with improved slip in aqueous systems
- A hard, high density modified polyethylene blend
- Provides outstanding rub, mar and scratch resistance
- Adds slip properties
- Imparts antiblocking
AquaPolyfluo® 411
A unique micronized oxidized polyethylene/PTFE wax composite for improved scuff and mar resistance in aqueous systems
- A synergistic blend of high molecular weight waxes including polyethylene and PTFE
- Provides optimum levels of scuff and mar resistance along with excellent slip and mobility
- Easy to disperse fine powder that can be incorporated into aqueous paints, inks and coatings with high speed mixing
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
AquaPolysilk® 19
A unique micronized polyethylene wax composite for lubricity with abrasion and heat resistance in aqueous systems
- A synergistic blend of waxes including polyethylene, PTFE and amide
- Provides abrasion and scratch resistance
- Improves heat resistance
- Imparts lubricity, tape release and a smooth surface feel after 12 to 24 hours
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
Aquawax 214VF
Oxidized Fischer-Tropsch wax for rub resistance and improved surface slip
- Imparts a high degree of lubricity
- Lowers COF
- Improves rub resistance
- Economical alternative to polyethylene waxes
Fluo 400SM
A unique emulsion grade PTFE grade consisting of aggregated sub-micron PTFE spheres ideal for thin film coatings and gloss retention
- PTFE clusters can be media milled into individual nanospheres less than 200 nm
- Superior gloss retention
- Provides lubricity, rub and abrasion resistance and heat resistance
- High surface area of dispersed particles allow lower dosages
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
Fluo 400XF
Micronized high quality virgin PTFE that provides superior lubricity, abrasion and temperature resistance to industrial coatings and inks
- Provides maximum abrasion and rub resistance
- Adds slip, lubricity and block resistance
- Imparts heat resistance
- Will not yellow in high temperature baking applications
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
Fluo HT
Micronized PTFE that provides superior lubricity, abrasion and temperature resistance to industrial coatings and inks
- Provides maximum abrasion and rub resistance
- Adds slip, lubricity and block resistance
- Imparts heat resistance
- Will not yellow in high temperature baking applications
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
Fluo HTL
Micronized PTFE that provides superior lubricity, abrasion and temperature resistance to industrial coatings and inks
- Provides maximum abrasion and rub resistance
- Adds slip, lubricity and block resistance
- Imparts heat resistance
- Will not yellow in high temperature baking applications
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
MicroKlear 116
A micronized composite of polyethylene and carnauba wax for surface slip and scratch resistance with excellent clarity and gloss retention. Also useful in seed coatings.
- Provides an excellent combination of slip, abrasion resistance, and scratch resistance
- Ideal for applications where excellent gloss and clarity are required
- In coil coatings, provides maximum slip for forming and fabrication of finished coil
- Reduces coil coating surface haze post-bake and water quench
- Provides excellent slip, scratch resistance and food release properties in metal packaging coatings
MicroKlear 418AL
Nanoalumina modified carnauba wax for maximum scratch resistance with surface slip, clarity and gloss retention. Also useful as an additive in seed coatings
- Natural carnauba wax composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9)
- Provides maximum scratch resistance with surface lubricity
- Does not adversely affect clarity or gloss
- Easier-to-disperse nanotechnology in a safe, non-nano powder
- Composite wax/alumina particle is less abrasive on processing equipment compared to free alumina
- Effective replacement for PTFE additives
MicroMatte® 1213 UVW
A modified polypropylene wax densified with silica for consistent gloss control with clarity and stability in water based and UV/EB coatings
- Effective gloss control with good in-can stability
- Adds slip with scratch and mar resistance
- Nonabrasive wax technology imparts a smoother surface feel vs. silica-based additives
- Provides burnish and blocking resistance
- Improved film clarity vs. MicroMatte 1011 UVW
Microspersion® 1213 UVW
A water based anionic dispersion of modified polypropylene wax, densified with silica for consistent gloss control with clarity and stability in water based and UV/EB coatings
- Convenient, ready-to-use, pourable anionic acrylic-stabilized wax dispersion
- Effective gloss control with good in-can stability
- Adds slip with scratch and mar resistance
- Nonabrasive wax technology imparts a smoother surface feel vs. silica-based additives
- Provides burnish and blocking resistance
Microspersion® 150-50
A nonionic water based dispersion of a unique, high performance composite of polyethylene and PTFE for surface lubricity with scratch and abrasion resistance
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Synergistic wax combination that enhances PTFE mobility to the coating surface
- High slip polyethylene provides excellent surface lubricity
- PTFE dramatically enhances abrasion resistance
- Extra fine particle size provides excellent gloss retention and film clarity
Microspersion® 19
An anionic water based dispersion of a unique micronized polyethylene wax composite for lubricity with abrasion and heat resistance in aqueous systems
- Convenient, ready-to-use, pourable anionic acrylic-stabilized wax dispersion
- A synergistic blend of waxes including polyethylene, PTFE and amide
- Provides abrasion and scratch resistance
- Improves heat resistance
- Imparts lubricity, tape release and a smooth surface feel after 12 to 24 hours
Microspersion® 190-50
A nonionic water based dispersion of a unique, high performance composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance with superior surface durability
- Convenient, ready-to-use, pourable nonionic wax dispersion
- High performance product for improving surface abrasion resistance and film toughness
- Synergistic wax combination that enhances PTFE mobility to the coating surface
- Low density polyethylene provides superior surface toughness, durability and mar resistance
- PTFE dramatically enhances abrasion resistance, antiblocking and film hardness
Microspersion® 215-50
A nonionic water based dispersion of oxidized polyethylene for rub resistance and improved surface slip
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Provides good rub and mar resistance
- Improves slip properties
- Imparts antiblocking
- Economical
Microspersion® 230-50
A nonionic water based dispersion of an economical grade of micronized polyethylene wax for abrasion resistance and slip
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Imparts abrasion resistance with some slip
- Provides excellent antiblocking properties
Microspersion® 250-50
A nonionic water based dispersion of micronized oxidized polyethylene wax for maximum rub and scratch resistance with improved slip in aqueous systems
- Convenient, ready-to-use, pourable nonionic wax dispersion
- A hard, high density modified polyethylene blend
- Provides outstanding rub, mar and scratch resistance
- Adds slip properties
- Imparts antiblocking
Microspersion® 31HD-40
A nonionic water based dispersion of finely micronized densified polypropylene for consistent matting and gloss control with superior in-can stability in water based paints, coatings and inks
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Efficient gloss reduction from satin to matte finish
- Improves burnish resistance vs. silica mattifiers
- Particle density optimized to essentially eliminate flotation or settling in most water based systems
- Imparts non-slip properties
Microspersion® 31SA-40
A nonionic water based dispersion of a finely micronized polypropylene/PTFE composite for consistent matting and gloss control with surface slip, abrasion and burnish resistance
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Efficient gloss reduction from satin to matte finish
- Polypropylene improves burnish resistance vs. inorganic flattening agents
- PTFE provides additional abrasion resistance, enhanced lubricity and surface slip
- Density optimized for maximum stability in water based and energy curable systems
Microspersion® 400SM-40
A nonionic water based dispersion of spherical submicron PTFE
- Convenient, ready-to-use, pourable nonionic wax dispersion that adds lubricity, rub and abrasion resistance
- Fluo 400SM PTFE aggregates are pre-dispersed into submicron nanoparticles
- Submicron wax particle size provides superior gloss retention
- High surface area of dispersed nanoparticles allow lower dosages
- Conforms to (EU) 2017/1000
- NOTE: This submicron wax dispersion is not freeze-thaw recoverable
Microspersion® 400XF-50
A nonionic water based dispersion of micronized PTFE that provides superior lubricity, abrasion and temperature resistance to industrial coatings and inks
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Provides maximum abrasion and rub resistance
- Adds slip, lubricity and block resistance
- Imparts heat resistance
- Will not yellow in high temperature baking applications
- Conforms to (EU) 2017/1000
Microspersion® 411
An anionic water based dispersion of a unique micronized oxidized polyethylene/PTFE wax composite for improved scuff and mar resistance in aqueous systems
- Convenient, ready-to-use, pourable anionic acrylic-stabilized wax dispersion
- A synergistic blend of high molecular weight waxes including polyethylene and PTFE
- Provides optimum levels of scuff and mar resistance along with excellent slip and mobility
Microspersion® 418AL-40
A nonionic water based dispersion of nano alumina modified carnauba wax for maximum scratch resistance with surface slip, clarity and gloss retention. Also useful as an additive in seed coatings
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Natural carnauba wax composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9)
- Provides maximum scratch resistance with surface lubricity
- Does not adversely affect clarity or gloss
- Composite wax/alumina particle is less abrasive on processing equipment compared to free alumina
- In seed coatings, improves anti-blocking, flow, and abrasion resistance
Microspersion® 523
A nonionic water based dispersion of a unique extra fine composite of polyethylene and PTFE for superior surface lubricity with scratch and abrasion resistance
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Synergistic wax combination that enhances PTFE mobility to the coating surface
- PTFE dramatically enhances abrasion resistance
- High density polyethylene provides improved surface slip
- Extra fine particle size provides excellent gloss retention and film clarity
Microspersion® 523AL-50
A nonionic water based dispersion of a highly engineered HDPE/PTFE/alumina nanocomposite for unsurpassed scratch and scuff resistance
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Maximum scratch and abrasion resistance with slip and lubricity
- HDPE/PTFE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9.0)
- Easier-to-disperse nanotechnology in a safe, non-nano powder
- Composite particle density maximizes efficiency and minimizes settling
- Extra fine particle size provides excellent gloss retention and film clarity
Microspersion® 526E
An anionic modified polyethylene wax emulsion for improving surface properties in water based coatings
- Imparts slip, scuff and abrasion resistance
- Improves mar resistance, block resistance and slide angle of water based inks, coatings and overprint varnishes
- Adds early water resistance
- Provides optimum surface protection while maintaining excellent gloss and film clarity
Microspersion® 611-50
A nonionic water based dispersion of a high performance grade of micronized polyethylene wax for inks and coatings
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Imparts excellent rub and mar resistance with good surface slip
- Provides excellent antiblocking properties
- Good heat resistance
- Better resistance to solvent absorption and swelling when compared to Fischer-Tropsch (synthetic) waxes
Microspersion® 620VF-50
A nonionic water based dispersion of high performance micronized polyethylene wax which provides a unique combination of surface slip, abrasion/rub resistance, and antiblocking in a wide variety of coatings and inks
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Imparts excellent abrasion, rub and mar resistance with good surface slip
- Provides excellent antiblocking properties
- Adds heat resistance
- Better resistance to solvent absorption and swelling when compared to Fischer-Tropsch (synthetic) waxes
Microspersion® 91E
A nonionic water based emulsion based on high molecular weight polypropylene
- Formulated with high melting polypropylene copolymer (melting point 157 °C)
- At higher dosages, imparts non-slip properties to water based floor finishes, printing inks and OPVs
- Adds soil release properties
- Enhances rub resistance
- Maintains gloss and clarity
- Combine with a PE emulsion to optimize rub resistance and slide angle
Microspersion® 930
A unique aqueous dispersion of micronized wax and emulsified wax
- Nonionic dispersion of microfine polyethylene component provides rub resistance and hardness
- Polyethylene emulsion component provides improved gloss retention
- Especially useful in high gloss water based OPV's
Microspersion® HT
A nonionic water based dispersion of micronized PTFE that provides superior lubricity, abrasion and temperature resistance to industrial coatings and inks
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Provides maximum abrasion and rub resistance
- Adds slip, lubricity and block resistance
- Imparts heat resistance
- Will not yellow in high temperature baking applications
Microspersion® NM31-35
A nonionic water based dispersion of finely micronized natural, biodegradable PHBV for efficient matting and burnish resistance in paints, coatings and inks
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Natural biofermentation powder
- Tough, high molecular weight biopolymer provides efficient gloss reduction
- Improved burnish resistance, better than many synthetic additives
- Imparts non-slip properties
- Freshwater and marine biodegradable to OECD test standards
Microspersion® R331-50
A nonionic water based dispersion of finely micronized rice bran wax for use in industrial coatings and agrochemical products
- Convenient, ready-to-use, pourable nonionic wax dispersion
- Natural wax
- Excellent burnish and abrasion resistance compared to synthetic wax additives
- Biodegradable to OECD 302C test standard
- Improves lubricity, dust-off, and block resistance in seed coatings
- Effective dry powder binding agent
MicroTouch 800VF
Highly resilient spherical polyurethane beads that can modify the tactile properties of formulated coatings and inks while improving burnish, scratch and mar resistance
- Virtually indestructible elastic particles that distort when disturbed by a physical force and then return to their original spherical shape when the force is removed
- Provide different tactile effects ranging from satiny smooth to rubbery to leathery in properly formulated coatings
- Different particle sizes available to create a unique surface "touch"
- Improves burnish and abrasion resistance
- Effective gloss reduction
MicroTouch 800XF
Highly resilient spherical polyurethane beads that can modify the tactile properties of formulated coatings and inks while improving burnish, scratch and mar resistance
- Virtually indestructible elastic particles that distort when disturbed by a physical force and then return to their original spherical shape when the force is removed
- Provide different tactile effects ranging from satiny smooth to rubbery to leathery in properly formulated coatings
- Different particle sizes available to create a unique surface "touch"
- Improves burnish and abrasion resistance
- Effective gloss reduction
MicroTouch 800XXF
Highly resilient spherical polyurethane beads that can modify the tactile properties of formulated coatings and inks while improving burnish, scratch and mar resistance
- Virtually indestructible elastic particles that distort when disturbed by a physical force and then return to their original spherical shape when the force is removed
- Provide different tactile effects ranging from satiny smooth to rubbery to leathery in properly formulated coatings
- Different particle sizes available to create a unique surface "touch"
- Improves burnish and abrasion resistance
- Effective gloss reduction
MicroTouch 850XF
Highly resilient modified spherical polyurethane beads that can modify the tactile properties of formulated coatings and inks while improving burnish, scratch and mar resistance
- Virtually indestructible elastic particles that distort when disturbed by a physical force and then return to their original spherical shape when the force is removed
- Provide different tactile effects ranging from satiny smooth to rubbery to leathery in properly formulated coatings
- Modified to enhance surface slip and lubricity
- Improves burnish and abrasion resistance
- Effective gloss reduction
MP-22XF
High performance, versatile grade of micronized Fischer-Tropsch wax for improved slip, scratch and rub resistance in a wide variety and paints, coatings and inks
- Imparts a high degree of lubricity and slip with rub and mar resistance
- Provides antiblocking properties
- Gives long-lasting water beading and weather resistance to exterior alkyd-based stains
- Easy to disperse fine powder that can be incorporated with high speed mixing
- Biodegradable to OECD 302C test standard
MPP-230F
Economical grade of micronized polyethylene wax for abrasion resistance and slip
- Imparts abrasion resistance with some slip
- Provides excellent antiblocking properties
- Easy to disperse fine powder that can be incorporated with high speed mixing
- Consider MPP-230EZ for an easier to disperse option
- Suitable for use in powder coatings as a de-gassing additive
MPP-611AL
A highly engineered HDPE/alumina nanocomposite for unsurpassed scratch and scuff resistance
- Maximum scratch and scuff resistance with slip and lubricity
- HDPE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9)
- Easier-to-disperse nanotechnology in a safe, non-nano powder
- Composite particle density maximizes efficiency and minimizes settling
- Effective replacement for PTFE additives
- Easier-to-disperse nanotechnology in a safe, non-nano powder
MPP-620VF
High performance micronized polyethylene wax which provides a unique combination of surface slip, abrasion/rub resistance, and antiblocking in a wide variety of coatings and inks
- Imparts excellent abrasion, rub and mar resistance with good surface slip
- Provides excellent antiblocking properties
- Adds heat resistance
- Better resistance to solvent absorption and swelling when compared to Fischer-Tropsch (synthetic) waxes
MPP-635VF
Micronized high molecular weight polyethylene wax for maximum rub and abrasion resistance in inks and coatings
- Crystalline, high melting point wax provides superior rub and abrasion resistance
- Imparts excellent antiblocking properties
- High molecular weight and hardness improves resistance to solvent absorption and swelling
- Easy to disperse fine powder that can be incorporated with high speed mixing
NatureFine H325
Finely micronized hydrogenated castor oil for use in industrial coatings and agrochemical products
- Naturally derived wax
- Adds slip, lubricity and rub resistance to industrial and graphic arts coatings
- Biodegradable to OECD 302C test standard
- Improves lubricity, dust-off, and block resistance in seed coatings
- Effective dry powder binding agent
- Microplastic alternative
NatureFine R331
Finely micronized rice bran wax for use in industrial coatings and agrochemical products
- Natural wax
- Excellent burnish and abrasion resistance compared to synthetic wax additives
- Biodegradable to OECD 302C test standard
- Improves lubricity, dust-off, and block resistance in seed coatings
- Effective dry powder binding agent
- Microplastic alternative
NatureMatte® 31
Finely micronized natural, biodegradable PHBV for efficient matting and burnish resistance in paints, coatings and inks
- Natural biofermentation powder
- Tough, high molecular weight biopolymer provides efficient gloss reduction
- Improved burnish resistance, better than many synthetic additives
- Imparts non-slip properties
- Freshwater and marine biodegradable to OECD test standards
- Microplastic alternative
Polyfluo® 150
A unique, high performance composite of polyethylene and PTFE for surface lubricity with scratch and abrasion resistance
- High performance product for adding slip, scratch and abrasion resistance
- Synergistic wax combination that enhances PTFE mobility to the coating surface
- High slip polyethylene provides excellent surface lubricity
- PTFE dramatically enhances abrasion resistance
- Extra fine particle size provides excellent gloss retention and film clarity
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
Polyfluo® 190
A unique, high performance composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance with superior surface durability
- High performance product for improving surface abrasion resistance and film toughness
- Synergistic wax combination that enhances PTFE mobility to the coating surface
- Low density polyethylene provides superior surface toughness, durability and mar resistance
- PTFE dramatically enhances abrasion resistance, antiblocking and film hardness
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
Polyfluo® 523AL
A highly engineered HDPE/PTFE/alumina nanocomposite for unsurpassed scratch and scuff resistance
- Maximum scratch and scuff resistance with slip and lubricity
- HDPE/PTFE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9)
- Easier-to-disperse nanotechnology in a safe, non-nano powder
- Extra fine particle size provides excellent gloss retention and film clarity
- Composite wax/alumina particle is less abrasive on processing equipment compared to free alumina
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
Polyfluo® 523XF
A unique extra fine, high performance composite of polyethylene and PTFE for superior surface lubricity with scratch and abrasion resistance
- High performance product for adding slip, scratch and abrasion resistance
- Synergistic wax combination that enhances PTFE mobility to the coating surface
- PTFE dramatically enhances abrasion resistance
- High density polyethylene provides improved surface slip
- Extra fine particle size provides excellent gloss retention and film clarity
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
Polysilk® 14
A complex formulated wax composite that provides a high degree of surface slip, scratch and rub resistance with gloss retention and a silky smooth feel
- Provides a high level of scratch and rub resistance
- Improves tape release, block resistance, and heat resistance
- Adds surface slip to impart a silky smooth feel
- Maximum lubricity achieved after 12 to 24 hours
- Useful for adding abrasion and antiblock properties to lamination inks at a 0.25-0.5% level
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
Polysilk® 600
A formulated wax composite that provides surface slip with scratch and rub resistance, as well as a smooth surface feel
- Provides a high level of scratch and rub resistance
- Improves tape release, block resistance, and heat resistance
- Adds surface slip to impart a silky smooth feel
- Maximum lubricity achieved after 12 to 24 hours
- Easy to disperse fine powder that can be incorporated with high speed mixing
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
PropylMatte 31
Finely micronized polypropylene for efficient matting and gloss control in paints, coatings and inks
- Provides consistent gloss reduction with no effect on coating viscosity
- Tough, high molecular weight polymer imparts burnish and abrasion resistance
- Imparts non-slip properties
- Density (0.89) ideal for solvent based systems
- For more efficient matting with a fine microtexture, try PropylTex 325S/270S
- Adds texture in low bake (Low E) powder coatings
PropylMatte 31HD
Finely micronized densified polypropylene for consistent matting and gloss control with superior in-can stability in water based paints, coatings and inks
- Efficient gloss reduction from satin to matte finish
- Improves burnish resistance vs. silica mattifiers
- Particle density optimized to essentially eliminate flotation or settling in most water based systems
- Imparts non-slip properties
- For more efficient matting with a fine microtexture, try PropylTex 325HD/270HD
PropylMatte 31SA
Finely micronized PTFE modified polypropylene for consistent matting and gloss control with surface slip, abrasion and burnish resistance
- Efficient gloss reduction from satin to matte finish
- Polypropylene improves burnish resistance vs. inorganic flattening agents
- PTFE provides additional abrasion resistance, enhanced lubricity and surface slip
- Density optimized for maximum stability in water based and energy curable systems
- Adds texture in low bake (Low E) powder coatings
- Conforms to (EU) 2019/1021 & Stockholm Convention (POP)
AquaBead® R331E
A high solids nonionic rice bran wax emulsion providing water repellency and lubricity with excellent rub and abrasion resistance
- Based on natural, biodegradable, sustainable and upcycled rice bran wax
- Adds slip and rub resistance to high gloss inks and coatings
- Excellent abrasion resistance
- Outstanding water repellency/beading properties superior to paraffin emulsions
- Developed for broad compliance in food packaging and agrochemicals