MICROSPERSION® 300SM-50
This product will be discontinued at the end of 2025.
A nonionic water based dispersion of spherical submicron PTFE
FEATURES AND BENEFITS
- Convenient, ready-to-use, pourable nonionic wax dispersion that adds lubricity, rub and abrasion resistance
- Fluo 300SM PTFE aggregates are pre-dispersed into submicron nanoparticles
- Submicron wax particle size provides superior gloss retention
- High surface area of dispersed nanoparticles allow lower dosages
- Conforms to (EU) 2017/1000
- NOTE: This submicron wax dispersion is not freeze-thaw recoverable
COMPOSITION
Nonionic wax dispersion
RECOMMENDED ADDITION LEVELS
1.0 - 3.0%
SYSTEMS AND APPLICATIONS
Water based coatings and inks. Industrial coatings (including plastic and metal); stains, sealers and varnishes; printing inks and OPV's (including flexo and gravure); interior and exterior can and container coatings; coil coatings; floor coatings.
TYPICAL PROPERTIES
| Request Sample Download TDS Download SDS | |
| Appearance | White Liquid |
| Density at 25 °C (g/cc) | 1.37 |
| Dry Wax ID | Fluo 300SM |
| Emulsifier Type | Nonionic |
| Mean Particle Size (µm) | < 1.0 (wax) |
| Natural or Naturally Derived | No |
| pH | 8.0 - 10.5 |
| Viscosity at 25 °C (cP) | 2,000 - 9,000 |
| Wax Solids | 50% |
|
| |
FEATURED PERFORMANCE PROPERTIES
| Compare | |
| Key: Effective Very Effective Extremely Effective |