PROPYLTEX® 270S

Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings


FEATURES AND BENEFITS

  • Provides gloss reduction with improved burnish resistance vs. silica
  • Adds a mild texture effect to the coating surface
  • Tough, high molecular weight polypropylene gives good durability
  • Does not lower COF; ideal for anti-skid surfaces
  • Narrow cut mean particle size grades available for maximum texture control
  • Adds texture in low bake (Low E) powder coatings

COMPOSITION

Polypropylene

RECOMMENDED ADDITION LEVELS

2.0 - 5.0% depending on the level of gloss reduction desired

SYSTEMS AND APPLICATIONS

Water based, solvent based, industrial coatings including metal, plastics and masonry, architectural wall and trim paints; stains, sealers and varnishes; wood coatings; floor coatings.

TYPICAL PROPERTIES

Request Sample Download TDS Download SDS
AppearanceWhite Powder
Density at 25 °C (g/cc)0.89
Maximum Particle Size (µm)53 (270 mesh)
Mean Particle Size (µm)18.5 - 23.0
Melting Point °C160 - 170
Natural or Naturally DerivedNo

FEATURED PERFORMANCE PROPERTIES

Compare
Burnish Resistance
Matting and Gloss Control
Non-Skid
Soft Touch
Texture
High Melt Flow Rate
Melt Flow Modifier
Fine Pore Forming
Low Residue
Increased COF
Matting and Gloss Control
Scratch and Abrasion Resistance
Texture
Increased COF
Matting and Gloss Control
Scratch and Abrasion Resistance
Texture
Block Resistance
Burnish Resistance
Increased COF
Matting and Gloss Control
Soft Touch
Texture
Anti-slip
Block Resistance
Cleanability
Matting and Gloss Control
No Silica Dust
Resistance to Hot Tire Pick up
Scratch and Abrasion Resistance
Scuff and Heel Mark Resistance
Soft Touch
Texture
Burnish Resistance
Matting and Gloss Control
Soft Touch
Texture
Key: Effective     Very Effective     Extremely Effective